Submersible pump WPE040D 400W 5 m – MTF – Clean to slightly dirty water 135 L/min – 1VOC1138

A compact, practical submersible pump

The MTF WPE040D 400W 5 m submersible pump is designed to lift and discharge clean to lightly contaminated water for household or occasional use. Its submersible format allows direct installation in the area to be drained. This pump accepts impurities up to 35 mm, broadening its use to lightly contaminated water. With an absorbed power of 400 W, a maximum flow rate of 135 l/min and a discharge head of 5 m, it efficiently meets everyday drainage needs. The 10 m cable provides great placement flexibility, while the standard float switch and thermal fuse contribute to simple, safe day-to-day operation.

When to use it

This pump is used to discharge clean to lightly contaminated water when the discharge head does not exceed 5 m. It is suitable for installations supplied with 230V / 50Hz and can be submerged up to 5 m. It remains suitable for liquids containing moderately sized impurities, up to 35 mm.

• Occasional dewatering of flooded areas
• Drainage of clean or lightly contaminated water
• Water discharge from an inspection chamber or tank

Why buy it

The WPE040D combines a compact format, useful lifting capacity and simple operation for everyday drainage needs. It offers a good balance of easy handling, flow rate and tolerance for small impurities, with a long cable and thermal protection that enhance its practicality.

Technical specifications

• Reference: 1VOC1138
• Pump type: Submersible (sand-resistant)
• Absorbed power: 400 W
• Maximum flow rate: 135 l/min
• Maximum discharge head: 5 m
• Maximum immersion depth: 5 m
• Water type: Clean to lightly contaminated water
• Maximum impurity size: 35 mm
• Power supply: 230V / 50Hz, 10A fuse protection required
• Equipment: 10 m cable, standard float switch, IPX8, 1 inch and 5/4 inch outlet, weight 3.55 kg, dimensions 18 x 16 x 32 cm