Replaces original reference: OREGON 75-054 PRIME LINE 7-078004 7-07875 7-5H820 SCAG 48204 STENS 258-082 265-389 SUNBELT B1CO405 Replaces original reference: AMF/DYNAMARK/NOMA 48044 OREGON 75-179 PRIME LINE 7-07875 7-5H820 STENS 258-082 265-389 265-633 SUNBELT B1SB6970
MaxPower Premium Kevlar® V-belts are reinforced with DuPont™ Kevlar® fiber. The cords integrated into the belt mass make KEVLAR Maxpower belts ideal for demanding uses and severe work cycles. Our belts feature a drier fabric coating to increase flexibility and withstand severe clutch action, bending or twisting. They can also support heavy loads and power take-off clutch or turbine return applications. These belts are also particularly resistant to heat generated by gardening machines during use. They are individually packaged for better storage and are available in widths of 3/8" (9.5mm), 1/2" (12.7mm) and 5/8" (15.87mm).
To be sure of the correct length of the type 5L (or 5H) belt, measure the length of the inside of the belt (or the passage over the pulleys) and divide this length by 1 inch or 2.54 then add 3. Example: The inner measurement of my belt is 104.14mm. I divide 104.14/2.54 which is 41, my belt will therefore be a 5H440 (5H because it is 15.87mm on the back and 440 because it corresponds to 41+3)
MaxPower Premium Kevlar® V-belts are reinforced with DuPont™ Kevlar® fiber. The cords integrated into the belt mass make KEVLAR Maxpower belts ideal for demanding uses and severe work cycles. Our belts feature a drier fabric coating to increase flexibility and withstand severe clutch action, bending or twisting. They can also support heavy loads and power take-off clutch or turbine return applications. These belts are also particularly resistant to heat generated by gardening machines during use. They are individually packaged for better storage and are available in widths of 3/8" (9.5mm), 1/2" (12.7mm) and 5/8" (15.87mm).
To be sure of the correct length of the type 5L (or 5H) belt, measure the length of the inside of the belt (or the passage over the pulleys) and divide this length by 1 inch or 2.54 then add 3. Example: The inner measurement of my belt is 104.14mm. I divide 104.14/2.54 which is 41, my belt will therefore be a 5H440 (5H because it is 15.87mm on the back and 440 because it corresponds to 41+3)
5H820
Specific References
5/8" X 82" Kevlar BELT, special garden machinery 347627 Maxpower
€23.54Tax Included