BELT 3/8" X 39" Kevlar, special for motoculture 347444 Maxpower

Replaces original reference: MTD 754-0271 954-0271 OREGON 75-339 STENS 238-039 SUNBELT B1MT96
MaxPower Premium Kevlar® V-belts are reinforced with DuPont™ Kevlar® fiber. The cords integrated into the belt mass make KEVLAR Maxpower belts ideal for tough applications and severe duty cycles. Our belts feature a drier fabric coating to increase flexibility and withstand severe clutch action, bending or twisting. They can also support heavy loads and pulley applications for PTO clutches or turbines. These belts are also particularly resistant to the heat generated by gardening machines during use. They are individually packaged for better storage and are available in widths of 3/8" (9.5mm), 1/2" (12.7mm) and 5/8" (15.87mm).
To ensure the correct length of a 3L (or 3H) type belt, measure the length of the inside of the belt (or the passage over the pulleys) and divide this length by 1 inch or 2.54, then add 1. Example: The inside measurement of my belt is 104.14mm. I divide 104.14/2.54 which is 41, so my belt will be a 3H420 (3H because it has a 9.5mm back and 420 because it corresponds to 41+1)