BELT 3/8" X 35" Kevlar, special for power equipment 347440 Maxpower
€10.95Tax Included
Belt for lawn mower, rotary tiller and garden tools, Belt back width: 9.5mm and thickness: 6mm inner length: 86.36 mm
Replaces original reference: CUB CADET 954-0430 MTD 754-0430 754-0430A 754-0430B 954-0430A 954-0430B OREGON 75-158 STENS Replaces original reference: OREGON 75-684 STENS 265-273 TORO 91-2258
MaxPower Premium Kevlar® V-belts are reinforced with DuPont™ Kevlar® fiber. The cords integrated into the belt mass make KEVLAR Maxpower belts ideal for heavy-duty use and severe working cycles. Our belts feature a drier fabric coating to increase flexibility and withstand severe clutch action, bending or twisting. They can also handle heavy loads and power take-off clutch or turbine return applications. These belts are also particularly resistant to heat generated by gardening machines during use. They are individually packaged for better storage and are available in widths of 3/8" (9.5mm), 1/2" (12.7mm) and 5/8" (15.87mm).
To ensure the correct length of the 3L (or 3H) type belt, measure the length of the inside of the belt (or the path over the pulleys) and divide this length by 1 inch or 2.54 then add 1. Example: The inner measurement of my belt is 104.14mm. I divide 104.14/2.54 which is 41, my belt will therefore be a 3H420 (3H because it is 9.5mm on the back and 420 because it corresponds to 41+1)
MaxPower Premium Kevlar® V-belts are reinforced with DuPont™ Kevlar® fiber. The cords integrated into the belt mass make KEVLAR Maxpower belts ideal for heavy-duty use and severe working cycles. Our belts feature a drier fabric coating to increase flexibility and withstand severe clutch action, bending or twisting. They can also handle heavy loads and power take-off clutch or turbine return applications. These belts are also particularly resistant to heat generated by gardening machines during use. They are individually packaged for better storage and are available in widths of 3/8" (9.5mm), 1/2" (12.7mm) and 5/8" (15.87mm).
To ensure the correct length of the 3L (or 3H) type belt, measure the length of the inside of the belt (or the path over the pulleys) and divide this length by 1 inch or 2.54 then add 1. Example: The inner measurement of my belt is 104.14mm. I divide 104.14/2.54 which is 41, my belt will therefore be a 3H420 (3H because it is 9.5mm on the back and 420 because it corresponds to 41+1)
3H350
Specific References
Belt for lawn mower, rotary tiller and garden tools, Belt back width: 9.5mm and thickness: 6mm inner length: 86.36 mm
BELT 3/8" X 35" Kevlar, special for power equipment 347440 Maxpower
€10.95Tax Included