Replaces the original reference: ARIENS 07211500 7211500 CASE/INGERSOLL C16088 C23804 C23807 MTD 1651-65 1651-72 41980 954-0355 OREGON 75-023 POWER KING 810067 PRIME LINE 7-07811 7-07830 7-07953 7-4H670 SEARS/CRAFTSMAN 543J STENS 248-067 265-599 265-855 SUNBELT B1MT108 B1SB6949 TORO 108195 108491 1595 TROY BILT 1108500 Replaces the original reference: MTD 754-0498 954-0498 OREGON 75-677 STENS 265-206 Replaces the original reference: CUB CADET 764-0645A 964-0645A MTD 754-0645 954-0645 9540645A OREGON 75-656 STENS 265-822
MaxPower Premium Kevlar® V-belts are reinforced with DuPont™ Kevlar® fibre. The cords integrated into the body of the belt make KEVLAR Maxpower belts ideal for heavy-duty use and severe work cycles. Our belts feature a drier fabric coating to increase flexibility and withstand severe clutch action, bending or twisting. They can also support heavy loads and applications for PTO clutch or turbine return. These belts are also particularly resistant to the heat generated by gardening machines during use. They are individually packaged for better storage and are available in widths of 3/8" (9.5mm), 1/2" (12.7mm) and 5/8" (15.87mm).
To ensure the correct length of the 4L (or 4H) type belt, measure the length of the inside of the belt (or the passage over the pulleys) and divide this length by 1 inch or 2.54, then add 2. Example: The inside measurement of my belt is 104.14mm. I divide 104.14/2.54 which is 41, so my belt will be a 4H430 (4H because it has a 12.7mm back and 430 because it corresponds to 41+2)
MaxPower Premium Kevlar® V-belts are reinforced with DuPont™ Kevlar® fibre. The cords integrated into the body of the belt make KEVLAR Maxpower belts ideal for heavy-duty use and severe work cycles. Our belts feature a drier fabric coating to increase flexibility and withstand severe clutch action, bending or twisting. They can also support heavy loads and applications for PTO clutch or turbine return. These belts are also particularly resistant to the heat generated by gardening machines during use. They are individually packaged for better storage and are available in widths of 3/8" (9.5mm), 1/2" (12.7mm) and 5/8" (15.87mm).
To ensure the correct length of the 4L (or 4H) type belt, measure the length of the inside of the belt (or the passage over the pulleys) and divide this length by 1 inch or 2.54, then add 2. Example: The inside measurement of my belt is 104.14mm. I divide 104.14/2.54 which is 41, so my belt will be a 4H430 (4H because it has a 12.7mm back and 430 because it corresponds to 41+2)
4H670
Specific References
BELT 1/2" X 67" Kevlar, special for motor cultivators 347510 Maxpower
€10.93Tax Included
Au lieu de €15.00