1/2" X 99" Kevlar belt, special garden machinery 347542 Maxpower

For machines of brands: MURRAY 1976-80 1984-90 Substitutes for the original reference: MURRAY 37X22 OREGON 75-022 PRIME LINE 7-07845 7-07964 STENS 248-099 265-263 265-801 SUNBELT B1MU22 For machines of brands: AYP/ROPER/SEARS 917.254490 951940 PP2050 HUSQVARNA GT180 Substitutes for the original reference: AYP/ROPER/SEARS 110883X 532110883 OREGON 75-108 PRIME LINE 7-07845 7-07929 7-4H990 STENS 248-099 265-263 265-801 SUNBELT B1RS54 Substitutes for the original reference: MTD 754-0440 954-0440 OREGON 75-161 PRIME LINE 7-07845 7-07958 7-4H990 STENS 248-099 265-056 265-801
MaxPower Premium Kevlar® V-belts are reinforced with DuPont™ Kevlar® fibre. The cords integrated into the mass of the belt make KEVLAR Maxpower belts ideal for tough uses and severe work cycles. Our belts feature a drier fabric coating to increase flexibility and withstand severe clutch action, bending or twisting. They can also support heavy loads and power take-off clutch or turbine return applications. These belts are also particularly resistant to the heat generated by gardening machines during use. They are individually packaged for better storage and are available in widths of 3/8" (9.5mm), 1/2" (12.7mm) and 5/8" (15.87mm).
To be sure of the correct length of the 4L (or 4H) type belt, measure the length of the inside of the belt (or the passage over the pulleys) and divide this length by 1 inch or 2.54 then add 2. Example: The inside measurement of my belt is 104.14mm. I divide 104.14/2.54 which is 41, so my belt will be a 4H430 (4H because it is 12.7mm on the back and 430 because it corresponds to 41+2)