Yard Force SA900B/ SA 900B 900M² Robotic Mower

In itself, the product corresponds to the description given, there's no denying it. But in reality, the product is less than satisfactory: 1- The boundary wire must be laid 40cm from the edges so that it can be recognized and followed by the robot. If not, the robot can't find it and can't return to the loading base, which leaves a further 40cm of edge to be cut by hand... 2- The robot's hood is too low to the ground, so if you don't have a "golf green" type lawn, the slightest tuft of grass will stop the robot, which will ignore part of your lawn (you need to cut 2cm to solve the problem). Advantage: inexpensive product. (Translated review)

Merchant response

Hello, Thank you for your feedback regarding the purchase of your robot. Installation and edging: As with all robot mowers, you'll need to lay a perimeter wire to guide the robot. Whatever happens, with this type of robot, you'll have to do the edging manually to finish mowing your lawn. If you want a more powerful robot, there are models that can get closer to the edges, but these are much more expensive. Terrain and preparation: To answer your second point, it's essential that your terrain is flat, with no holes or bumps. Furthermore, if your lawn is high, we recommend that you first mow it by hand. Thereafter, your robot can work daily to mow regularly, which will prevent it from getting stuck. Once again, more powerful models are available, but they are also much more expensive. We hope this information will meet your expectations and enable you to use your robotic lawnmower in the best possible conditions. If you need any further advice, please do not hesitate to contact our support department.

Great robot mower, very easy to set up and program, as the user manual is very well explained. (Translated review)

Pas assez de recul pour donner un avis objectif (8 jours) Semble un produit de bonne qualité et un service yard force facile à contacter et efficace. Naturellement le robot taille dans le meilleur des cas à 12cm des bordures, pour moi poser le fil périphérique à environ 25cm des bordures. Mise en service manuelle simple, par contre pour moi c 'est un peu plus compliqué pour entrer dans la machine. A voir dans 3 mois avec plus d'expérience.

Not enough time to give an objective opinion (8 days) Seems a good quality product and a yard force service easy to contact and efficient. Naturally, the robot trims at 12cm from the edges in the best of cases, but for me, the perimeter wire is laid at around 25cm from the edges. Easy to set up manually, but for me it's a bit more complicated to get into the machine. To be seen in 3 months with more experience. (Translated review)