Texas TMX1600 Robot Lawn Mower

Efficient and quiet robotic mower for large lawns up to 1600 m², equipped with an app, ultrasonic sensor and many other smart features.
Description
With the TEXAS TMX1600 robotic mower, you'll enjoy ultra-quiet mowing at a maximum of 57 dB, making it almost imperceptible during operation. Capable of handling large lawns up to 1,600 m² (maximum 1,800 m²) and slopes up to 24° (45%), it uses mulching and multiple starting points to ensure uniform cutting across the entire lawn, including smaller areas at the front and back. Its ultrasonic sensor avoids collisions with obstacles during operation.
Thanks to the multilingual app, you can access the TMX1600 anytime when connected to Wi-Fi, and the mower creates a map of your lawn in the app, making it easy to set up multiple zones and mowing schedules. Installation is simple and straightforward, and you can clean it with a garden hose. The TEXAS robotic mower operates efficiently, requiring minimal effort from you.
The TMX series builds on the popular RMX series, with a new design, improved hardware, and a more advanced LCD display on the mower itself, in case you prefer not to use the app.
Customize your robotic mower in the app
The TMX1600 comes with a smart multilingual app for your phone, offering complete control over your robotic mower. In the app, you can set TMX1600's daily mowing schedule (two time slots), configure starting points for Multi Zone, schedule edge cutting, view its mowing log, and install software updates to improve performance or resolve issues.
After approximately 14 days of mowing, the TMX1600 creates a map of your lawn in the app, allowing you to easily set starting points for the Multi Zone function.
Once connected to Wi-Fi, you can always access your mower via the TEXAS app. If your Wi-Fi doesn't reach the garden, you can connect via Bluetooth when within a few meters of the mower or use the mower's improved LCD screen, which is now even easier to use if you choose not to connect via the app.
Sensors and software enhance mowing
The robotic mower operates within the boundary wire, and its software ensures it never follows the same path, preventing tracks on the lawn. Thanks to edge cutting, it can follow the boundary wire, cutting as far as possible, and the TMX1600 can navigate through passages as narrow as 80 cm.
The TMX1600 is equipped with a front ultrasonic sensor that can be set to detect obstacles at three different distances, approximately 15 cm in height, redirecting the mower before it contacts the obstacle. Additionally, it has other practical sensors to facilitate its operation.
The obstacle sensor detects contact with objects at a minimum distance of 10 cm and redirects the mower. Similarly, the slope sensor redirects it if the lawn becomes too steep, and if the mower unexpectedly tips, this is logged and displayed in the app.
The lift sensor automatically stops the blades if the mower is lifted, reducing the risk of injury. The rain sensor also allows you to choose whether the mower should return to the charging station and wait for dry weather before resuming, ensuring a cleaner cut.
Efficient mowing
The TMX1600 has a cutting diameter of 22 cm, using three razor-sharp pivoting blades that mulch grass at a rotation speed of 2,300 rpm. The height adjustment knob lets you choose from nine cutting heights, ranging from 20 mm to 60 mm, and it operates with a noise level not exceeding 57 dB, making it almost silent.
The three pivoting blades are mounted on a spring-suspended blade disc that automatically adapts to the terrain, ensuring even cutting and reducing the risk of stalling on uneven ground or bumps.
Depending on the lawn setup, the robotic mower has an active cutting time of 2 to 2.5 hours before returning to the charging station and fully recharges in about 2 hours. For lawns close to 1600 m², it's recommended to set it to mow for several hours over two daily time slots.
Discreet charging station and easy cleaning
The TMX1600 charging dock can be discreetly placed in a corner of the lawn. This charging station also includes 'Super-Link', which extends your Wi-Fi signal to the mower even at a distance, ensuring continuous app connectivity.
When the mower is connected to the charging station, it enters 'Eco mode', cutting power to the boundary wire and reducing energy consumption. The power supply draws 76 W and 3 A, with an estimated annual cost of 50 to 150 DKK, depending on usage and electricity prices.
You can easily clean the mower with a garden hose, as it's rated IPX5 for water resistance. This means it can also operate in rainy weather, although for best results, we recommend mowing in dry conditions.
The TMX1600 features a UV-resistant plastic cutting shield to prevent sun-induced discoloration, and the two rear wheels, which drive the mower, have three rows of tread pattern for high traction, preventing wheel spin and stalling on loose ground.
The LED light on the front indicates whether the mower is actively mowing, returning to the station, charging, or if there's a problem, making it easy to respond if it occasionally needs help. The mower includes a unique PIN code, making it useless if stolen, as it's not accessible or usable outside its boundary wire.
Robot mower testing
Before launching our RMX robotic lawn mower range in 2022, we conducted extensive testing in 2021 to optimize and improve the mowers for real-world use.
We invited numerous testers from across Denmark with different garden types, sizes, and lawns. From the applicants, we selected 46 testers from different garden types who tested the RMX500 model throughout the 2021 season.
While the mower worked on their lawn, testers provided ongoing feedback about what worked well and what could be improved. At the end of the season, 86% of testers stated that the robotic mower met their expectations and they would recommend it to others.
All feedback helped us refine the manual and improve future models, resulting in today's improved and thoroughly tested robotic lawn mower that delivers a perfectly maintained lawn.
Included accessories
Charging station, power supply, 200 m boundary wire, 280 pegs, 9 pivoting blades, and a detailed installation and user manual.
TEXAS recommends
Grass trimmer for all grass edges
If the boundary wire isn't placed right next to the pavers, there may be a narrow strip of grass along the lawn edge, which can be quickly cut with a simple grass trimmer. You might also want to explore our 20V battery series, where you can use the handy GTX2000 grass trimmer and share the battery with other garden machines.
Robot mower accessories
Need more boundary wire? Or perhaps a garage roof for the charging station? Or a cleaning tool for easier maintenance. Check out our great accessories.

Features
Cutting height
: 20-60mm
Mulching
: Yes
Number of height settings
: 9 positions
Number of blades
: 3 pcs.
Shield material
: Plastic
Weight
: 10.6kg
Box width
: 49cm
Box length
: 32cm
Box height
: 89cm
Battery type
: Lithium battery
Charging time
: 2 hours
Blade speed
: 2300 rpm
Height adjustment
: Central
Blade
: Metal
Working time from
: 120-180 minutes
Power
: 5.0 Ah
Voltage
: 20 volts
Cutting width
: 22 cm
Width
: 35cm
Length
: 56cm
Height
: 24 cm
Guaranteed LWA
: 57
Obstacle sensor
: Yes
Tip sensor
: Yes
Tilt sensor
: Yes
Boundary wire
: 220 m
Pegs
: 280 pcs.
Climbing slope (max)
: 24°

Manual
Manual
Spare parts drawing
Spare parts drawing